Granite Exporter Of Essentials + Exotics
Pocono Green granite is a dark green charnockite of the Precambrian period sometimes with gold flecks. This stone internationally may be nominated as a granite but in the area of application of the European Standard this stone must be nominated as a charnockite. The veining and colour varies and a small sample of Pocono Green granite may not be representative of the whole slab therefore swatch samples must be approved for large projects to ensure that the blocks are all extracted from the same quarry face for matching purposes. During the polishing process a clear epoxy resin filler may be used to fill any micro fissures or tiny pitting however this does not affect the integrity of the stone, it merely provides an even smoother surface finish. Pocono Green Granite is suitable for both interior and exterior use futhermore is frost resistant and with a constant polish.
Suitable for construction projects both commercial and domestic, prefabricated countertops/worktops, vanities, tiles, backsplashes, paving, fireplaces and memorials.
Pocono Green Granite looks best with a gloss polished surface but is also available as honed, leather/satin, river-washed/antique, thermal/flamed, flamed & brushed, water-jet, bush-hammered, sandblast and sawn finish.
Test with a small sample. It is possible that a sealant can be used on Pocono Green Granite however excessive attempts at sealing it could actually create a residue film build-up.
Ceeweed Green, Seaweed Green, Sea Weed Green, Seawed Green, Seawwed Green, Sewed Green, Titanic Green
Pocono Green granite is quarried near Titlagarh, Orissa, West and East Ghats, India.
Pocono Green granite slabs are available in standard 20mm and 30mm thickness for random slabs, cut-to-size (dimensioned) and prefabricated to the customer's specifications, 40mm thick are produced but are not usually held in stock for immediate despatch.
Standard Slab Sizes
Large Gangsaw(2800mm & above x 1800mm & above)
Medium Gangsaw(2200mm & above x 1200mm & above)
Vertical Cutter(2200mm & above x 600~900mm)
Premium Quality Slab Sizes
When available 3000+mm x 2000+mm
Free length or made to your dimensions, standard sizes are
2400~3200 x 600/630/700/900/1000/1200 x 30 mm
50mm through to 200mm thick are cut to customer specifications, please Contact Us with the material(s), sizes and finishes you require.
Pocono Green granite Premium & Commercial quality calibrated, bevelled & grooved matching granite tiles.
Standard Tile Sizes
305 x 305 x 10 mm (12" x 12" x ⅜")
610 x 305 x 10 mm (24" x 12" x ⅜")
400 x 400 x 10 mm (15¾" x 15¾" x ⅜")
457 x 457 x 10/12 mm (18" x 18" x ⅜~½")
610 x 610 x 15/18 mm (24" x 24" x ⅗~¾")
Furthermore 305/400/457/610 mm x Freelength, normally up to 2000mm (78.75") for you to cut to length on site. Longer lengths can easily be produced HOWEVER this could possibly create an on-site handling and cutting production challenge.
As you can see our granite tile production size capabilities are extremely flexible, please Contact Us with the material(s), sizes and finishes you require.
Contractors can be responsible for the accuracy of the data, to learn more about this directive please read here.
Compression Tensile Strength: 2607 kg/cm2
Tensile Strength After Freeze-Thaw Cycles: 1973 kg/cm2
Unitary Modulus Of Bending Tensile Strength: 134 kg/cm2
Water Imbibition Coefficient: 0.0023
Mass By Unit Of Volume: 2751kg/m3
Hardness (Moh's Scale):
Note: These figures and details are given for guidance purposes only, no reliance should be taken as to their accuracy.
A hypersthene granite typical of Precambrian assemblages that contain migmatites. Charnockite is composed of orthoclase, oligoclase, quartz, and hypersthene; it also often includes the garnets almandine and pyrope, as well as biotite, magnetite, and other minerals. Two types of charnockites are distinguished: ferrohypersthene charnockite and garnet charnockite.
This is a medium-sized granite quarry yielding several, selectable, grades of granite with blocks suitable for gangsaw size down to economical tile-sized and monument blocks. Extraction commenced in the late 2000s. For commercial projects it is important to ensure that blocks are selected from the same quarry face.
Rough blocks are usually exported by Break Bulk however intermodal containerisation is available at extra cost. Finished products are packed into sea-worthy wooden crates and loaded into containers.